Krytac Technical Discussion Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 9      1   2   3   4   Next   »
Allizard

Avatar / Picture

Chief Janitor
Registered:
Posts: 843
Reply with quote  #1 
Hey guys, 

If you have come across of a compatible magazine for the AEG that is not on the list.  Please drop us a note here.  We'll verify it and put it on the list.

Thanks.


0
wallabear

Junior Member
Registered:
Posts: 5
Reply with quote  #2 
my King Arms 120 rnd mags are working just fine, and also the ASG 140 rnd mags are working quite well also
0
E-House

Avatar / Picture

Junior Member
Registered:
Posts: 6
Reply with quote  #3 
G&P Polymer high RPS midcaps feed well and fit with no wobble but do not drop free or. "flip" out of the gun.
0
Frost

Junior Member
Registered:
Posts: 3
Reply with quote  #4 

Tried and functioned:
- Lancer PDW highcap
- 190rd PMag highcap
- Lonex Flashmag
- VFC midcap

0
nick86

Junior Member
Registered:
Posts: 20
Reply with quote  #5 
Socom gear 190rd Lancer midcap(fits tight)
0
VVVV

Junior Member
Registered:
Posts: 19
Reply with quote  #6 
Lonex flash mag worked but it's super wobbly like the included hi-cap.

kwa k120 mags fit much better.
0
GoldxEagle

Avatar / Picture

Regular Member
Registered:
Posts: 116
Reply with quote  #7 
Just a response to the user above me, I have 8 KWA 120 midcaps. Not one of which will feed well on full or semi. I have tried every different kind of lipo and checked everything through and through. Im not the only one with this issue either. I can get about 3/10 rounds through, where others users cannot get a single bb to feed from them. I am waiting to find some g&p mids to try out since i hear they feed very well.
0
Allizard

Avatar / Picture

Chief Janitor
Registered:
Posts: 843
Reply with quote  #8 
GoldxEagle..

We have tested KWA mag and it does work.  However, if the spring on the mag is weaken it will not keep up with the motor as it's spinning around 22rd / sec with lipo.    Try stretching the spring on one of the mag and try it again.


0
GoldxEagle

Avatar / Picture

Regular Member
Registered:
Posts: 116
Reply with quote  #9 
Thank you for the response, ill give it a try later today and get back.
0
GoldxEagle

Avatar / Picture

Regular Member
Registered:
Posts: 116
Reply with quote  #10 
Getting back on the Kwa 120 midcaps. Took 4 mags.. 3 as control and another to test. I took the spring out of the test one and stretched it a bit. Tested 2 original mags which continued with the same issue. Tried the test mag which now feeds fine on semi. Full auto still has problems, but I only use semi anyway so no issue for me there. Then the final control mag continued to not feed. Have been using these mags for over a year so I imagine the spring has compressed quite a bit compared to when they were purchased. I also stretched the spring on one other one just to make sure. Stretched it a bit more than the first and I can get a little more on full auto. So it is definitely working for semi for me. Will probably do it for the other 6 mags when my fingers stop hurting from getting the springs back in. [tongue].

To admins: Should I move this post to another thread? Compatible magazines doesn't seem the place for this now.
0
Allizard

Avatar / Picture

Chief Janitor
Registered:
Posts: 843
Reply with quote  #11 
This is fine.  We can use this thread to discuss magazine.  Any mag that have been tested will update the list in the library.  


0
KRISS Sierra Tango

Avatar / Picture

Kriss Staff
Registered:
Posts: 591
Reply with quote  #12 
Definitely look into servicing your K120 midcaps. If the spring is not in top condition, you may experience misfeeding because, remember, on an 11.1v LiPo, our CRB is capable of firing at 22-24 rounds per second, which is quite fast -- a burst of less than 6 seconds will empty the mag!

Prior to release, one of our testers reported misfeeding with his K120s. The issue was isolated to his magazine. I completely disassembled the mag, cleaned out the channel, stretched the follower spring, and the mag fed flawlessly afterward, both in semi-auto and full auto.

__________________
Please note, any specifications given in my posts (unless specifically noted) are North America/US market specifications. Your specifications may differ due to different markets, your country's regulations, etc.
0
Firewolf

Avatar / Picture

Junior Member
Registered:
Posts: 2
Reply with quote  #13 
I bought a box of brand new FDE k120's and the only problem I have with then is their inability to keep up with my gearbox on a fresh lipo. Granted, after I've ran through a mag or two they feed excellent. [smile] thanks so much for a great product krytac!
__________________
[P2V]
0
_Schocker_

Junior Member
Registered:
Posts: 3
Reply with quote  #14 
Echo 1 cmag will not lock in place in the shrike.
0
donnystyles

Junior Member
Registered:
Posts: 4
Reply with quote  #15 
Quote:
Originally Posted by E-House
G&P Polymer high RPS midcaps feed well and fit with no wobble but do not drop free or. "flip" out of the gun.


Same for me. Its really tight fit.
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.