Krytac Technical Discussion Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Shootin Blanks

Avatar / Picture

Junior Member
Registered:
Posts: 11
Reply with quote  #1 
I'm looking in to replacing the following four type of screws for my Krytac MK2 SPR: KA002-53U, KA002-44U, KA002-39U and the KA002-46U.

I've found on this forum (or online) the size of the following screws:

KA002-53U = M2.5 x 0.45 8mm
KA002-44U = M3 x 0.5 10mm
KA002-39U = M3 x 0.5 10mm
KA002-46U = M2x0.4 flat heat screw, 8mm

and only need to know the diameter of the last screw, the KA002-46U. Can someone please help ?
0
Maldonado92

Junior Member
Registered:
Posts: 2
Reply with quote  #2 
I too would really like the size of this last screw if anybody knows,please and thank you!
0
Shootin Blanks

Avatar / Picture

Junior Member
Registered:
Posts: 11
Reply with quote  #3 
I've updated the list for the :

KA002-44U = M3 x 0.5 8mm
KA002-39U = M3 x 0.5 8mm

I tried the 8mm but it was too short, 10mm is the correct size.
0
Maldonado92

Junior Member
Registered:
Posts: 2
Reply with quote  #4 
Oh nice! That's awesome! Now if only we had the last screw size, mine ended up stripping... And don't want to buy the whole mag release... Are you able to find these screws at a local hardware store? I was just going to bring in the screw and try and find a match tomorrow
0
Shootin Blanks

Avatar / Picture

Junior Member
Registered:
Posts: 11
Reply with quote  #5 
Hi Maldonado92, not sure we're u are from but I'm from the Netherlands and I found an online store here we're I could order these micro screws as the normal stores here didn't have them that small or not in blank steel.
0
KRISS Sierra Tango

Avatar / Picture

Kriss Staff
Registered:
Posts: 591
Reply with quote  #6 
KA002-46U, or the magazine catch screw, is an M2x0.4 flat heat screw, 8mm overall length.
__________________
Please note, any specifications given in my posts (unless specifically noted) are North America/US market specifications. Your specifications may differ due to different markets, your country's regulations, etc.
0
Shootin Blanks

Avatar / Picture

Junior Member
Registered:
Posts: 11
Reply with quote  #7 
Great!! Thanks for the size of the KA002-46U screw... I've updated the list
0
Fbeca

Junior Member
Registered:
Posts: 13
Reply with quote  #8 
What about the specs of screws :
KA001-87U and
KA001-86U?

I would like to replace them on my gearbox shell. Thanks!
0
KRISS Sierra Tango

Avatar / Picture

Kriss Staff
Registered:
Posts: 591
Reply with quote  #9 
Both NAUTILUS gearbox screws use an M3x0.5mm flat head machine screw. The long screw measures 18mm overall length and the short screw is 8mm overall length. These screws call for a #1 Phillips driver.
__________________
Please note, any specifications given in my posts (unless specifically noted) are North America/US market specifications. Your specifications may differ due to different markets, your country's regulations, etc.
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.