Krytac Technical Discussion Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
GenePoolReject

Junior Member
Registered:
Posts: 1
Reply with quote  #1 
I was hoping I could pick the brains of a few more knowledgeable folk. Earlier this year I picked up an SPR new, unfortunately it’s only managing 240-250fps. That’s on stock internals, hop up at position 3 and using an 11.1 lipo. I’ve played several games since I purchased it and it’s never caused much of a problem but it supposed to be at 350 and my sites limit is 370 so I’d like to make use of it. So I was hoping to get an idea as to what the cause could be and perhaps even recommendations for replacement parts.

If it makes any difference I am Uk based.
0
Kraken_Wrangler

Avatar / Picture

Janitor
Registered:
Posts: 493
Reply with quote  #2 
What weight BBs did you test?

Also, what kind of chronograph did you use?
0
Qlayertwo

Junior Member
Registered:
Posts: 1
Reply with quote  #3 
I'm haveing the same problem got a spr mk2 a couple of months ago
I never noticed the low fps bc the rang wasnt effect I have tried 3 different chronos its running 220fps to 200fps on .28 and 250fps on .20
Even tho I have noticed this problem I upgrade to a new Laylax flat bucking and a r hop barrel rang is still good but vary low fps anyideas ?
0
TigerWhisky

Junior Member
Registered:
Posts: 1
Reply with quote  #4 

Hi!

do you have the original box? Try seeing in the sticker the version of the model you have. Some of the Italian Models are very low on fps. Mine came with 260-270 a simple change to a Guarder M100 kicked it to the 330 fps range

1
KRISS Sierra Tango

Avatar / Picture

Kriss Staff
Registered:
Posts: 621
Reply with quote  #5 
This is exactly why it's important to mention where you are located and which region your KRYTAC product was designed for.

If it is an Italian model, the product SKU on the packaging will end with "04". The SPR intended for the Italian market is configured with an M85 spring, KRYTAC 20K motor, and Type 2 cylinder.

If this is a Mk2 SPR designed for US, Brazil, Canada, Hong Kong, or EU market (product SKU ending in 01 or 02), these are configured with an M120 spring, KRYTAC 30K motor, and Type 1 cylinder, meaning that 250 FPS with 0.20g BBs is definitely too low and would need inspection to determine why it is performing so low.



Also, TigerWhisky, please be aware, you are replying to a post that was made on 21 February 2019, which itself was replying to a post made on 13 November 2018 when they should have created a new post topic.

__________________
Any specifications given in my posts (unless specifically noted) are US market specifications. Your specifications may differ due to different markets, your country's regulations, etc.
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.