Krytac Technical Discussion Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Twstdplsre

Junior Member
Registered:
Posts: 9
Reply with quote  #1 
Been a proud owner of a vector for two months, slowly have been upgrading, building on it. Lurked here a lot for help, I’ll post what I’ve done. Maybe help/inspire other owners.

-I upgraded the inner barrel to kn 255mm, PTS GRIFFEN flash hider and QD surpressor to hide the additional barrel length.
-KRISS USA MK1 handrail.
Magpul mil-spec buffet tube and adjustable Magpul mil-spec CTR Stock with Magpul QD swivel mount.
-laser pointer mounted under barrel (I use this not for aim but as a “spook”)
-an/peq for flashlight contemplating a true flashlight over 300 lumens with strobe.
-trinity force 1-4x28 assault II optic and red dot. Changed the ring mount from the two point to two single points to fit a weaver accessory rail. The Trinity Force is a 30mm tube diameter. The red dot is mounted left. I shoulder right, both eyes open, I’m cross eye dominant, have the scope in my right eye, red dot in my left. Full peripheral view and near and far vision. Faster reaction time when someone comes around a corner. Navy taught me that trick. For those who shoulder right, but left eye dominant, you might prefer this set up vs an offset picatinny mount for your red dot and left rotational target acquisition.
-Magpul RVG - nothing beats thumb break (IMO).

I currently get 330 with .25, 370 with .20. Have ran it between burst and semi extremely hard in game and blown fuses (2c 11.1), thousands of rounds with the only break between triggers is mag changes before that fuse blows, I stay stock with 20amp.

I am contemplating the KRISS USA barrel shroud as a possibility for the future. Flashlight I’m considering is the inforce wlmx white to replace an/peq.

If you read to here, thank you! All comments and feedback good or bad is welcomed!

Attached Images
jpeg 7846C1B6-9F4B-4719-8BB6-19B0A9359AC1.jpeg (2.75 MB, 34 views)
jpeg 90B4E1BC-E749-4666-8336-383F78BE2611.jpeg (2.35 MB, 29 views)
jpeg BAEA8DE8-023C-44C0-8559-0F0B511BF3B1.jpeg (4.61 MB, 23 views)

0
rocketdogbert

Regular Member
Registered:
Posts: 51
Reply with quote  #2 
Nice but if kit you have there. Go for the barrel shroud, it’s awkward and needs some
engineering to fit, but well worth it


0
Twstdplsre

Junior Member
Registered:
Posts: 9
Reply with quote  #3 
Quote:
Originally Posted by rocketdogbert
Nice but if kit you have there. Go for the barrel shroud, it’s awkward and needs some
engineering to fit, but well worth it





I’ve been contemplating the barrel shroud strictly because of your post from the other month, great instructions btw rocketdogbert!
0
dhong_sd

Junior Member
Registered:
Posts: 41
Reply with quote  #4 
Really looks awesome with barrel shroud. Thinking about it too but because i like using tracer unit on every game i played coz i only play cqb. Thats wat stopping me for.
0
kinesis

Regular Member
Registered:
Posts: 100
Reply with quote  #5 
@dhong_sd. did you consider modifying your hop up unit to contain the LEDs for charging the tracer bb's? this is my next project. hoping to receive the hop ups in a week or so. just a bit stuck on where to put the battery source. worse case scenario would be a fore grip with a battery cavity.

i agree with you. as much as i like tracer bb's the tracer unit is a hindrance.


=)
-k
0
dhong_sd

Junior Member
Registered:
Posts: 41
Reply with quote  #6 
@kinesis. I dont want to modify the internals for now. I just have the xcortech x3300 with peq unit. I like the feature of the counter unit to see if im low in bb great feature of the tracer plus the chrono as well coz im still learning how to speed up my reload. Just thinking if i can put the tracer inside the barrel shroud but i dont hav the exact dimension of the barrel.
0
leechmonger

Junior Member
Registered:
Posts: 37
Reply with quote  #7 
Quote:
Originally Posted by dhong_sd
@kinesis. I dont want to modify the internals for now. I just have the xcortech x3300 with peq unit. I like the feature of the counter unit to see if im low in bb great feature of the tracer plus the chrono as well coz im still learning how to speed up my reload. Just thinking if i can put the tracer inside the barrel shroud but i dont hav the exact dimension of the barrel.


I did this to my Famas, I ran 8 3mm UV LEDS, connected to a resistor and connected that straight to the main battery (11.1v 1000mAh 20C lipo). It never died on me. Let me know how your project turns out, I am interested, also if you need help let me know. 
0
Twstdplsre

Junior Member
Registered:
Posts: 9
Reply with quote  #8 
Quote:
Originally Posted by Twstdplsre
Been a proud owner of a vector for two months, slowly have been upgrading, building on it. Lurked here a lot for help, I’ll post what I’ve done. Maybe help/inspire other owners.

-I upgraded the inner barrel to kn 255mm, PTS GRIFFEN flash hider and QD surpressor to hide the additional barrel length.
-KRISS USA MK1 handrail.
Magpul mil-spec buffet tube and adjustable Magpul mil-spec CTR Stock with Magpul QD swivel mount.
-laser pointer mounted under barrel (I use this not for aim but as a “spook”)
-an/peq for flashlight contemplating a true flashlight over 300 lumens with strobe.
-trinity force 1-4x28 assault II optic and red dot. Changed the ring mount from the two point to two single points to fit a weaver accessory rail. The Trinity Force is a 30mm tube diameter. The red dot is mounted left. I shoulder right, both eyes open, I’m cross eye dominant, have the scope in my right eye, red dot in my left. Full peripheral view and near and far vision. Faster reaction time when someone comes around a corner. Navy taught me that trick. For those who shoulder right, but left eye dominant, you might prefer this set up vs an offset picatinny mount for your red dot and left rotational target acquisition.
-Magpul RVG - nothing beats thumb break (IMO).

I currently get 330 with .25, 370 with .20. Have ran it between burst and semi extremely hard in game and blown fuses (2c 11.1), thousands of rounds with the only break between triggers is mag changes before that fuse blows, I stay stock with 20amp.

I am contemplating the KRISS USA barrel shroud as a possibility for the future. Flashlight I’m considering is the inforce wlmx white to replace an/peq.

If you read to here, thank you! All comments and feedback good or bad is welcomed!


I made a few changes. I do now have the barrel shroud on. Had a milled “pipe” made. Will add photos later today. The “pipe” can be removed by a grub screw. The shroud attaches the “pipe”. The tip of the pipe has a deralin insert affixed to the front to assist in mounting the shroud center. The inner barrel has a foam insert attached to keep echo noise inside the shroud to a minimum. I’ve also attached the streamlight HL-X rail mount flashlight. 1,000 lumens with high, strobe, low and ten tap programming. The EOtech is real. And Magpul rvg and xtm handstop. Just waiting for a 12 slot picatinny to fully mount the xtm accessories I want and this guy is done. Huge shout out to rocket for his craftiness in this!

Attached Images
jpeg 4499AFC1-0947-4C81-86B8-F3354F0A6A57.jpeg (1.73 MB, 13 views)
jpeg 8DD943E4-273C-4933-BD4C-B2EC3C0707C5.jpeg (1.86 MB, 15 views)
jpeg 55FD9997-365E-4E5B-8634-ADA663F16FA8.jpeg (1.75 MB, 13 views)
jpeg 34A122AC-28BA-4860-8511-43615D82BD9A.jpeg (1.38 MB, 15 views)
jpeg 9DCE05FC-A089-4CA8-83D2-4D597A23AB20.jpeg (1.45 MB, 18 views)

0
Twstdplsre

Junior Member
Registered:
Posts: 9
Reply with quote  #9 
Quick update. The new inner barrel at 370mm, FPS increased to 399 with it. Up from 330 I was getting.
0
A_inc

Junior Member
Registered:
Posts: 16
Reply with quote  #10 
Full CQB build with Laylax thread protector for the muzzle which has replaced G&P adapter for fisherman QD silencer with power-up barrel which I have lost on the mil sim and which didn't do much anyway since it was produced with a contortion unfortunetely, G&P DBAL with modified night evolution pressure switch, AIMTIS surefire X300 replica with IR\White modes in a custom 3D printed casing to fit flashlight into upper receiver and modified night evolution button switch on custom low profile 3D printed side rail, TDI vertical grip which can also be replaced with modified PTS angled grip or just removed, custom tracer unit installed in hop-up feeding from the main battery with a switch near the hop-up wheel, micro T1 gray lens replica, *cough* ex holder of airsoft vector production licence *cough* sling swivel pin with fastex attachment, and homemade mag pouch on a stock. Internals were slightly modified during the repairing but mostly nothing was changed dramatically.
1.jpg   1f.jpg 

0
sheywood

Junior Member
Registered:
Posts: 21
Reply with quote  #11 

Quote:
Originally Posted by Twstdplsre
Quick update. The new inner barrel at 370mm, FPS increased to 399 with it. Up from 330 I was getting.


Hola,

Are you seeing that FPS with the 370mm barrel and stock spring, or did you upgrade spring as well?

0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.